Essilor Pro-E 600 edger User Manual Download Page 79

Page: 79 / 198

Place the lens in the posiblock holder.

Place the metal peg of the posiblock upwards and the positioner downwards: a magnet is used to

hold the lens in position on the axis.

You can clamp the lens manually by pressing

Make sure you move your hand well away before you start the edging cycle.

Press

to start the cycle.

Proceed to a retouch if necessary, then carry out the edging of the second lens.

> With the ophthalmic lenses now edged, carry out the edging of the Chemistrie lenses

Select the Chemistrie clip

that you wish to edge.

The following screen is displayed:

SER

ANUAL

> II. E

DGING

LENS

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands