Essilor Pro-E 600 edger User Manual Download Page 135

Page: 135 / 198

You can position each drilling point in relation to the reference drilling point by modifying the values in the

columns:

•

X coordinates in relation to the reference drilling point

•

Y coordinates in relation to the reference drilling point

To select another drilling point as the reference drilling point:

Select the drilling point you want to use as the reference drilling point

Press

to the right of its coordinates.

The selected drilling point is displayed at the top of the list:

•

The symbol # is displayed on the left of its coordinates

•

The drilling point is displayed in dark blue

in the work area.

The coordinates of the other drilling points are also updated.

SER

ANUAL

> III. P

REPARING

DRILLED

JOB

135

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands