Essilor Pro-E 600 edger, User Manual

Page: 145 / 198

1. Chamfer
◦ Small, front surface
◦ Large, front surface
◦ Small, rear surface
◦ Large, rear surface
2. Lens materials
◦ Plastic
◦ Polycarbonate
◦ MHI
◦ Trivex TM
◦ Tribrid TM
◦ Glass (not available)
3. Increasing or reducing the default chamfer
a. Press the value to be modified.
> The numeric keypad is displayed.
b. Enter the new value.
◦ Negative value: the chamfer will be smaller
◦ Positive value: the chamfer will be larger
c. Press to confirm.
Once the modification is made, press to return to the work screen.
e. Adjusting the groove
After edging a lens, if the width or depth of the groove always seem too close too small or too big, you can
adjust them.
To access that menu from your edger work screen, select > > .
The following screen is displayed:
U
SER
M
ANUAL
> IV. C
ONFIGURING THE EDGER
145
Pro-E 600_Pro-E 700 > v1 -10.18