Essilor Pro-E 600 edger User Manual Download Page 143

Page: 143 / 198

After edging a lens, if the position of the bevel or groove always seems too close to the front or rear surface,

you can adjust it.

To access that menu from your edger work screen, select

The following screen is displayed:

Default bevel position

◦

Press

to move the bevel towards the front surface of the lens.

◦

Press

to move the bevel towards the rear surface of the lens.

Default polished bevel position

◦

Press

to move the polished bevel towards the front surface of the lens.

◦

Press

to move the polished bevel towards the rear surface of the lens.

Default groove position

◦

Press

to move the groove towards the front surface of the lens.

◦

Press

to move the groove towards the rear surface of the lens.

Once the modification is made, press

to return to the work screen.

c. Adjusting the diameter of drill-holes

After drilling a lens, if the diameter of the holes always seems too small or too big, you can adjust it

according to the diameter of the drill bit used and the lens material.

To access that menu from your edger work screen, select

The following screen is displayed:

SER

ANUAL

> IV. C

ONFIGURING

THE

EDGER

143

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands