Essilor Pro-E 600 edger User Manual Download Page 133

Page: 133 / 198

For greater precision, when you use the virtual mouse or the

and

buttons, press

zoom in on the selected drilling point: the displacement step is 0.01mm (0.1mm for normal display).

Press on the drill-hole, slot or notch to select it.

The drilling point is displayed in red.

Press a few seconds on the value corresponding to the coordinates to be modified:

•

X coordinates

•

Y coordinates

•

Distance in relation to the edge of the lens.

•

X coordinates in relation to the reference drilling point

•

Y coordinates in relation to the reference drilling point

Lock

the distance in relation to the edge of the lens to adjust only the Y position of the

drilling point.

The numeric keypad is displayed.

Enter the new value and press

to confirm.

The drilling coordinates are modified.

SER

ANUAL

> III. P

REPARING

DRILLED

JOB

133

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands