Essilor Pro-E 600 edger User Manual Download Page 95

Page: 95 / 198

The result can be viewed in the zoom window and the display window of the bevel trajectory on the

lens section.

Press

systematically to tilt of the bevel (mounting aid).

The bevel tilt is selected

The result can be viewed in the zoom window.

Press the “cycle start” button (front face) or

The edging cycle starts.

When the edging cycle is finished, the retouch screen is displayed.

Press

to release the lens.

If necessary, retouch the lens.

Otherwise, start edging the second lens. Select the lens directly on the screen, on the left or right of the

work area.

SER

ANUAL

> II. E

DGING

LENS

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands