Essilor Pro-E 600 edger User Manual Download Page 177

Page: 177 / 198

The following screen is displayed:

Cleaning the door and the “small tools” module

Cleaning the door

a. Press

to start the door cleaning cycle.

The module moves to facilitate the cleaning.
> The door opens.

b. Use a cloth to clean the inside of the door.

Cleaning the module and trough

Press

to start the cleaning cycle.

> The door closes.

> The cleaning is done automatically.

Clean the step bevel wheel

In case the cycle time continues for a significant period or a “too much strain” warning appears, the step

bevel wheel can be cleaned.

1. Dismantle the wheel

2. Clean the wheel with a decalcifer such as white vinegar.

Cleaning must be performed only when the wheels have been disassembled and

are outside the

trough

SER

ANUAL

> V. M

AINTENANCE

SERVICING

177

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands