Essilor Pro-E 600 edger User Manual Download Page 165

Page: 165 / 198

Remove the adjustable key and the blocking key.

The mill bit is in place.

During the installation of a new tool, the statistics are automatically reset to zero by default.

>The

icon appears by default at the bottom of the screen.

Press

at the bottom of the screen to confirm the tool change-over.

The module goes back into its initial position, the statistics are cleared.

c. Changing the chamfering wheel

We recommend that you change the chamfering wheel every 6,000 chamfers.

From the work screen of your edger, select

to change the chamfering wheel.

Prerequisite:

You must have the following tools:

Blocking key

an Allen key

Press

The GMD module moves to facilitate the operation.

SER

ANUAL

> V. M

AINTENANCE

SERVICING

165

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands