Essilor Pro-E 600 edger User Manual Download Page 140

Page: 140 / 198

Other languages

Press

to display the other languages.

Confirm

Press

to save the time.

Once the settings has been adjusted, press

to go back to the work screen.

b. Connections

The connections are configured from the tracer. The screen which you access from the edger is only

available for consultation purposes.

To access this menu from your tracer work screen, select

The following screen is displayed:

List of devices connected to the tracer

Settings linked to the configuration of the serial port

Settings linked to the configuration of the Ethernet port

Reinitialization of communication ports

Once the modification is made, press

to return to the work screen.

Pro-E 600_Pro-E 700 > v1 -10.18

140

SER

ANUAL

> IV. C

ONFIGURING

THE

EDGER

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands