Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
7
Administrator’s Menus
System Menu
Fig. II-1: System Menu in Dynamo theme
Fig. II-2: System Menu in Plain theme
System Configuration Wizard
The
System Configuration Wizard
allows the administrator to define the Quadro’s Local Area Network settings and to specify regional configuration
settings to make Quadro operational in its LAN. The
System
Configuration Wizard MUST be run upon Quadro's first startup
to make sure that it
works properly in its network environment. The Wizard allows navigating through the following basic configuration parameters and settings:
•
System Configuration (see below)
•
DHCP Settings for the LAN Interface
•
Regional Settings and Preferences (see below)
•
Emergency Codes and PSTN Access Codes Settings (see below)
DHCP Settings for the LAN are described in the chapters
below. The LAN configuration and regional settings will be
described later in this chapter.
Please Note:
It is strongly recommended to leave the
factory default settings if their meanings are not fully
clear to the administrator.
Fig. II-3: System Configuration Wizard - Start page
