Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
37
The
GUI Access Password
offers the following components:
•
The
Old Password
text field is only present when
modifying the Administrator account password and
requires the current password of the Administrator. An
error message prevents entering the wrong password.
•
The
New Password
text field requires a new password
for the Administrator or Local Administrator. Reentering
the new password in the
Confirm New Password
text
field will confirm the new password. The
New Password
field is checked against its strength and you may see
how strong is your inserted password right below that
field.
Fig. II-65: Change Password page
Please Note:
The password can consist of numeric values and symbols. Up to twenty (0-20) digits and symbols are allowed.
The
Phone Access Password
offers the following
components:
•
The
Old Password
text field is present when
modifying the Administrator account password and
requires the current password of the Administrator. An
error message prevents entering the wrong password.
•
The
New Password
text field requires a new
password for the Administrator. Reentering the new
password in the
Confirm New Password
text field
will confirm the new password. The
New Password
field is checked against its strength and you may see
how strong is your inserted password right below that
field. The password can consist of numeric values
only.
Please Note:
Up to twenty (0-20) digits are allowed. A
corresponding warning appears if any other symbols are
inserted.
Fig. II-66: Change Password page
The
Enable User
and
Disabled User
functional buttons are used to enable or disable the Local Administrator’s account.
Attention:
It is highly recommended to define a proper and non-empty password on this page if the extension is being used for the Call Relay
service from the Quadro's Auto Attendant.
Please Note:
The Administrator’s account cannot be
disabled. The
Roles
page contains a table where the Local
Administrator and Extensions users are listed. This page
allows you to set the permissions to the GUI pages for each
user in the table.
The
Edit
functional button leads to the
Change Access
Rights
page where a list of user specific GUI pages is
displayed. Select the user in the table and press
Edit
to
manage the permission for the corresponding user.
Fig. II-67: Roles page at User Rights Management
