Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
16
Static Parameters:
Extension
shows the extension number of the
selected telephone line.
Display Name
shows the corresponding name.
Phone State
may have the value
On Hook
or
Off
Hook
. For IP Line Status, this field may additionally
have
Not Configured
and
Temporary Offline
values.
Number of Active Calls
shows the number of calls
that are currently present on the phone.
Dynamic Parameters:
Registration:
Username
shows the IP phone’s client name
registered on the Quadro.
Last Registered
shows the date and time, the
corresponding IP phone has been last registered
on the Quadro.
Expires In
shows when the last registration of the
IP phone will expire.
Binding IP Address
shows the IP address of the
IP phone within the Quadro’s LAN network.
Calls:
Call State
shows the current state of the extension
(in voice mail, in call, waiting, busy, call out, ring in,
etc.).
Caller Party
appears when a call is received and
indicates the caller extension and the IP address or
a phone number, depending on type of call.
Fig. II-20: Lines Status - Lines Status page upon established call
Called Party
appears when a call is placed and indicates the destination extension and the IP address or a phone number, depending on type of
call.
Call Type
shows whether the call is
Internal
or
External
and
whether it is a
PSTN
call,
PBX
call
or
IP
call.
Call Start Time
shows the call start date and time.
Call Duration
shows the current call duration.
RX Codec
shows the codec used to encrypt the incoming packets.
TX Codec
shows the codec used to encrypt the outgoing packets. If RX and TX
codecs are the same, only one
Codec
field will be displayed.
The list of supplementary services provides the following additional status information for each telephone line:
Enabled
or
Disabled
.
For
Incoming
and
Outgoing Call Blocking
,
Speed Calling, Hiding Caller Info
,
Voice Mailbox
and
Group List
services, the number of
Entries
will be displayed in the corresponding service table. For
Voice Mail Service
, the voice mailbox configuration mode is displayed here.
This allows administrator to view the status and to be notified about services running on Quadro for every line. The services are designed as links
that guide the administrator to the corresponding service page of the selected user.
The
Line Status
for
ISDN Trunk
displays the state of the B1 and B2 channels and the information about the active calls on them. Page includes a
group of static and dynamic parameters. Static parameters are always displayed. Dynamic parameters appear only whenever an event takes place
on the channel.
