Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
12
The
System Security Settings
page includes the following
components:
The
Security Level table
- allows selecting the Security Level
defining requirements to the IP Lines' password strength and
the Security Report granularity. The security levels are as
follows:
•
Low
- There are no specific restrictions on the
strength of the saved password. Only the critical
warnings on the Call Routing Rules to PSTN and IP-
PSTN, disabled Firewall and IDS will be generated in
Security Report.
•
Medium
- The minimum strength of the IP Line
passwords should be "good". The Security Report
will generate warnings on all unsecured Call Routing
rules, IP Line passwords, Firewall level (if it is set to
lower than "Medium") and disabled IDS.
•
High
- The minimum strength of the IP Line
passwords should be "strong". The Security Report
will generate warnings on the IP Line passwords,
disabled IDS, unsecured SIP, and unsecured
Routing Rules to SIP, PSTN and IP-PSTN and also
regarding the Firewall level if it is set to lower than
"High".
Fig. II-12: Quadro System Security Management page
The
System Security Diagnostics
page allows running the security audit and getting the security reports. The Start Security Audit functional button
is used for running the security audit. The Quadro Security Audit is a security reporting system, which generates the warnings regarding the Quadros
weaknesses relative to the selected Security Level. The warnings may vary depending on the selected global Security Level. The Security Audit will
detect the security related configuration issues in Firewall, IDS, IP Line passwords, Call Routing and extension settings.
The output of Security Audit may look as follows:
Start security audit...
Checking...
Firewall ... done
IP Lines ... done
Call Routing ... done
Extensions ... done
Users ... done
Settings do not correspond to selected security
level.
You can view the complete report by clicking the
'Show the latest security report' link below.
Fig. II-13: Quadro System Security Diagnostics page
The
Show the latest security report
link allows to display the last security audit report. This page also contains the following useful links to adjust
the system security:
•
User Rights Management
•
IP Line Settings
•
Firewall/NAT
