Epygi Quadro4Li, Administrator'S Manual

Page: 26 / 145

Quadro4Li Manual II: Administrator's Guide Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
25
Numerous circumstances may cause a certain application on
Quadro to flag an event.
The Event Settings page lists all possible events on the Quadro
and allows controlling notification (action) when an event takes
place.
Each entry in the events’ table has a checkbox assigned to each
row. By selecting the corresponding checkboxes, operations
such as
Edit may be done for one or more events.
Edit opens the Edit Event Settings page to modify the event
action.
Fig. II-41: Event Configuration Settings page
The Edit Event Settings page offers the following input options:
Application displays the application the event refers to. Multiple
is shown here if more than one event has been selected for the
action assignment.
Name displays the name of the event. Multiple is shown here if
more than one event has been selected for the action
assignment.
Description displays additional information about the event.
Multiple is shown here if more than one event has been
selected for the action assignment.
Action offers radio buttons to choose one of the actions to notify
the Quadro administrator when an event(s) takes place. The
following actions can be available:
Fig. II-42: Edit Event Settings page
•
Display Notification - A notification link will be displayed on the bottom of all pages and a record is added into the Events table. The
notification is executed as a link “Please Check you pending events!”. The link leads to the System Events page. This action also will take place
if Flash LED or Send Mail has been selected, even if not specifically selected.
•
Flash LED - The second LED (yellow) will blink every second and a notification will be displayed on the bottom of all pages. For some events
the LED will start flashing after a delay.
•
Send Mail – an e-mail notification about the new event on the Quadro will be sent to the e-mail address specified in the Mail Settings page.
•
Send SNMP Trap – an SNMP notification will be sent to the traphost(s) listed in the SNMP Trap Settings table (see SNMP Settings ).
•
Send SMS – an SMS notification about the new event on the Quadro will be sent to the mobile phone specified in the SMS Settings page.