Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
64
If you have selected the snom 320/360/370/720/760/
820/821/870, Grandstream GXP 2000/2100/2110/2120, Yealink
T-28P/T-26P/T-38G IP phones from the
Phone Model
drop
down list, the next page in the wizard will be the
Receptionist
Phone Configuration Wizard
–
Hardware Modules
. For all
other phone models, this page is skipped.
For Grandstream GXP 2000/2100/2110/2120 IP phones, this
page contains a single checkbox only:
The
Enable Expansion Module
checkbox is used to enable the
supplementary module attached to the IP phone. The
Expansion Modules Count
drop down list allows you to select
how many additional expansion modules will be connected to
the IP phone. When the module is selected, the number of
programmable keys on the next page of the wizard is multiplied
accordingly.
Fig. II-112: Receptionist Phone Configuration Wizard – Hardware Modules for snom phone
For Aastra 6739i, 6755i and 6757i IP phones,
Receptionist
Phone Configuration Wizard
–
Hardware Modules
page
contains a number of drop down lists to select the types of the
expansion modules and the sequence in which they are
connected to the IP phone.
Fig. II-113: Receptionist Phone Configuration Wizard – Hardware Modules for Aastra phone
The next page of the wizard is skipped for QCM
Phone Model
selection. The content of this page depends on the configuration made on the first
page of the
Receptionist Phone Configuration Wizard
.
The
Receptionist Phone Configuration Wizard
–
Programmable Keys Configuration
page both for Aastra and
snom phones is used to set the correspondence between the
selected
Functions
and the available Programmable keys on
the IP Phone. To do so, assign a Function to each
programmable key from the drop down list on this page.
The following options are available in
Functions
the drop down
list:
•
Watch Ext. #
- watch the extension on the Quadro and a
possibility to pickup the call addressed to that extension.
•
Call Park Ext #
- watch the calls parked to the
corresponding extensions and a possibility to retrieve the
calls parked to that extension.
This list also contains a number of PBX services available on
the Quadro and accessible with the
*
key combination (see
Quadro’s Feature Codes). When configured from this page, the
key combinations become transparent for the IP phones too.
•
Vmail
– accesses the voice mailbox of the extension to
which the receptionist IP line is attached to.
•
DND
– enables the Do Not Disturb service on the
extension to which the receptionist IP line is attached to.
•
CallFwd
– accessed Forwarding Management of the
extension to which the receptionist IP line is attached to.
•
AutoReDI
– auto redials the last dialed call.
Fig. II-114: Receptionist Phone Configuration Wizard – Programmable Keys Configuration for snom phone
