Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
51
2.
Park Access List
This page is used to define a list of extensions that are allowed
to park the call to the corresponding call park extension. The
wildcard is supported in the
Address
field to add a group of
extensions with one entry.
If the extension is not in the Park Access List for the
corresponding call park extension, it will not be able to park a
call to this call park extension.
By default, this table contains a “*” entry which allows any PBX
users to park the call to this extension.
Attention:
If you modify the Park Access List by adding new
extensions, do not forget to remove the default “*” entry from the
list for the new configuration to take effect.
Fig. II-92: Extensions Management - Edit Entry – Park Access List for call park extension
3.
Retrieve Access List
This page is used to define a list of callers that are allowed to
retrieve a call parked to the corresponding call park extension.
If the caller is not in the Retrieve Access List for the
corresponding call park extension, it will not be able to pickup a
call parked to this call park extension.
By default, this table contains an “Auto-*” entry which allows any
caller to pickup the call parked to this extension.
Attention:
If you modify the Retrieve Access List by adding new
callers, do not forget to remove the default “Auto-*” entry from
the list for the new configuration to take effect.
The
Add
functional button opens an
Add Entry
page where a
new caller can be added to the list. This page consists of the
following components:
Call Type
lists the available call types:
•
PBX - local calls from Quadro’s extensions
•
SIP – calls through a SIP server
•
PSTN – calls from global telephone network
•
Auto – used for undefined call types. The destination
(independent on whether it is a PBX number, SIP address
or PSTN number) will be passed through Call Routing
Table.
The
Address
text field is used to define the address to be
included in the Retrieve Access List table. The value in this field
is strictly dependent on the Call Type defined in the same
named drop down list. If the
PBX
call type is selected, the
Quadro extension number should be defined in this field. For the
SIP
call type, the SIP address should be defined, for the
PSTN
call type, the PSTN user number should be defined here. The
wildcard is supported in this field.
Fig. II-93: Extensions Management - Edit Entry – Retrieve Access List for call park extension
Fig. II-94: Extensions Management - Edit Entry – Retrieve Access List for call park extension
Paging Group Extension Settings
Paging Group & Access List
The
Paging Group
service is used to page a group of extensions by forcing extensions to go off-hook and opening one-way communication. The
service is particularly used for announcements addressed to a group of extensions. Service allows to page multiple extensions by dialing the
Paging
Group
extension.
Please Note:
The
Paging Group
service requires called extensions to use one of the following SIP or analog phones which are able to
automatically go off-hook:
•
snom 300
•
Aastra 6737i
•
Polycom VVX 1500
•
snom 320
•
Aastra 6739i
•
Polycom SoundStation IP 6000
•
snom 360
•
Aastra 480e
•
Thomson ST2030S
•
snom 370
•
Grandstream BT200
•
Yealink SIP-T20P
