Epson SC-T3200 Series User Manual Download Page 52

Page: 52 / 228

Backward : The roll is taken up with the printable

side in.

Forward

: The roll is taken up with the printable

side out.

Off

: The auto take-up reel unit does not

take up paper.

Manual switch

Selects the manual take-up direction.

The setting selected with the Manual switch takes
effect when the Auto switch is in the Off position.

Backward : The roll is taken up with the printable

side in.

The speed will increase after the button
is pressed for more than three seconds.

Forward

: The roll is taken up with the printable

side out.

The speed will increase after the button
is pressed for more than three seconds.

Attaching the Paper

This section describes how to attach roll paper to the
auto take-up reel unit roll core.

The procedure varies with the take-up direction.

Important:

Before proceeding, select

Off

for

Auto Cut

. Using

the auto take-up reel unit when

is selected will

cause errors.

“Cutting the roll paper” on page 32

Taking Up the Paper Printable Side
Out

For information on installing the roll core, see the

Setup

Guide

for the optional auto take-up reel unit.

Buttons that are used in the following settings

Set the auto take-up reel unit Auto switch to Off.
Plug the power cord into an outlet and confirm
that the power lamp lights.

Turn on the printer by pressing the

button.

Check that the roll paper is correctly loaded in the
printer.

Press the

)

button on the control panel. Keep

the

button pressed until the end of the roll

reaches the roll core.

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Basic Operations

Summary of Contents for SC-T3200 Series





































































































































































































































Search results

Summary of Contents for SC-T3200 Series

Reviews:

Related manuals for SC-T3200 Series

Brands by name

Popular brands

Epson SC-T3200 Series, User Manual

Search results

Summary of Contents for SC-T3200 Series

Reviews:

Related manuals for SC-T3200 Series

Brands by name

Popular brands