Item
Description
Roll End Option
Continue
Select the action to perform for a roll after replacement: print the
remaining data (
Continue
) / do not print (
Stop Printing
again from the beginning (
Reprint
).
Stop Printing
*
Reprint
*3
Auto Loading
*1
On
*
Normally, leave the setting at
On
.
If you experience problems with automatic loading when you use
commercially available paper because of lack of tension,
slipperiness, extremely large curls, or other problems, set to
Off
.
Remove all paper before configuring this setting. If paper is
loaded, the setting cannot be changed.
While the setting is
Off
, the Roll 2 unit cannot be used.
Off
Roll Switch Setting
*1
Auto
*
Select the action to take when the roll currently in use is under the
following conditions: automatically switch between Roll 1 and Roll
2 and print (
Auto
) / print fixed to Roll 1 (
Roll 1
)/print fixed to Roll 2
(
Roll 2
).
❏
The roll is finished, and there is data still to be printed.
❏
The printer predicts that there is not enough roll paper
remaining, and printing cannot be completed.
❏
The print margin will be large for the width of the print job.
When the setting is
Auto
, the roll is switched according to the Roll
Switch Condition setting.
Roll 1
Roll 2
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
147
