Epson SC-T3200 Series User Manual Download Page 39

Page: 39 / 228

Note:

To remove paper that was loaded but not used, press the

(

button and select

Remove Paper

Buttons that are used in the following settings

Confirm that

Paper Eject

is displayed in the

control panel.

Keeping a hand on the cut sheets to prevent them
falling from the printer, press the

button.

The paper will be fully ejected from the printer
and can then be removed by hand.

Loading and Removing
Poster Board

This section describes how to load and remove poster
board from 0.8 to 1.5mm thick.

The printer can be used with board of the following
sizes.

A2/A1/B2/B1

/B1 landscape

/24 × 30 inch/30 × 40

inch

* Not supported by the SC-T3200 Series.

Loading Poster Board

Poster board requires space both behind and in front of
the printer. The approximate amount of space required
is shown below. If the printer is set up near a wall, make
sure there is enough space at the rear.

Paper Size

Front (a)

Back (b)

444 mm

135 mm

691 mm

382 mm

24 × 30 inch

612 mm

303 mm

30 × 40 inch

866 mm

557 mm

Important:

Insert the paper just before printing. The roller may
leave an impression on paper that is left in the
printer.

SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide

Basic Operations

Summary of Contents for SC-T3200 Series





































































































































































































































Search results

Summary of Contents for SC-T3200 Series

Reviews:

Related manuals for SC-T3200 Series

Brands by name

Popular brands

Epson SC-T3200 Series, User Manual

Search results

Summary of Contents for SC-T3200 Series

Reviews:

Related manuals for SC-T3200 Series

Brands by name

Popular brands