Epson C Series, Maintenance Manual

Page: 591 / 668

C12 Maintenance 7. Joint #3
C Series Maintenance Manual Rev.2 571
8. After fixing the Arm #3, fix the Arm #2 side arm.
Hexagon socket head cap bolts: 6-M5 × 20 (with a plain washer)
Tightening torque: 10.0
±
0.5 N·m
9. Install the Joint #3 pulley 2 to the Joint #3 shaft.
Hexagon socket head cap bolts (with 1 brass bushing): 2-
M5
×
12
Tightening torque: 3.9 ± 0.2 N·m
Insert the pulley 2 so that one of the set screws is at the flat
face of the shaft. The brass bushing is not necessary for the
screw for the flat surface. Set the bushing to the other
screw and then fix the screw.
If the screw positions are incorrect or the bushing is not set, it may cause damage on the side of the
brake and may result in the part being unable to be removed.
10.
Install the Joint #3 timing belt.
For details, refer to C12 Maintenance 7.3 Joint #2 – Replacing the Timing Belt , Installation steps (1) to
(2).

NOTE