Epson C Series, Maintenance Manual

Page: 262 / 668

C8 Maintenance 4. Cable Unit
242 C Series Maintenance Manual Rev.2
As shown in the photo, disconnect the Ethernet cable and air tube
(blue) at one side of the Arm #4.
Disconnect the remaining cables at the other side.
Align the marked positions and the position on the Arm #4
indicated with the arrow in the photo.
9. Install the cable fixing plate to the Arm #4.
Hexagon socket head cap bolts: 2-M4 × 10
Tightening torque: 4.0
±
0.2 N·m
10. Use a cable bracket (C4) to fix the cables.
Hexagon socket head cap bolts: 2-M3
×
6
Tightening torque: 2.4 ± 0.1 N·m
C8/C8L:
Wrap the cables with the attached silicone sheet.
Use a cable bracket to fix the wrapped silicone sheet.
C8XL:
Place the silicone tube to the position where it is fixed with a cable bracket.
Use a cable bracket to fix the silicone tube.

NOTE