Environnement AS32M, Technical Manual, Page: 80 / 186

Environnement
S.A
AS32M
Duplication prohibited
DECEMBER 2013
3–42
Editing stored data in tabular form: this screen shows the list of stored data according to parameters
defined in the previous screen. The running mode (measurement, zero, calibration, etc.) during a data
storage period is coded in the status column. The meanings of the status codes are follows:
Code (HEX) Code (DEC) Descriptions
00 0 Valid
measure
01 1 Invalid data (stand-by, no measure mode…)
02 2 General alarm
04 4 Calibration
08 8 Zero
value
10 16 Span value
20 32 Maintenance
40
64 Less than 2/3 of measure within means
80 128 Supply fault
FF 255 Configuration change
The displayed status code is a sum of all status codes (hexadecimal numbers) that occur during the
data storage period. An example of an average period of 20 min is :

A 5-min zero and 15-min measurement displays status code 00, and the displayed average is the
15-min measurement average.

An 11-min zero and 9-min measurement displays status code 08, and the displayed average is the
11-min zero average.
Other examples in the screen above are the status code 07, which is the sum of status codes 01, 02,
and 04.
Function of keys specific to this screen:
[

] [

] Select previous or next page.
[ ] Select stored data beginning or end.
[

]
Display other measurement channels if more than three channels are
programmed in the
« CONFIGURATION

Measure channels »
screen