Environnement AS32M, Technical Manual, Page: 49 / 186

Duplication prohibited
AS32M
Environnement
S.A
DECEMBER 2013
3–11
3.2.1.2 Description of Keys
The key functions are defined in area

of the screen and vary according to the menu displayed. For
the purposes of this discussion, the keys are represented here by brackets containing the symbol that
is shown on the screen.
[  ] Displays the previous menu or aborts the current operation (parameter programming, etc.)
[  ] Selects the required submenu and the parameter to be modified. Also increases the value of the
parameter whose modification is in progress.
[  ] Selects the required submenu and the parameter to be modified. Also decreases the value of the
parameter whose modification is in progress.
[  ] Moves the cursor to the left (only available during numerical parameter modifications).
[  ] Moves the cursor to the right (only available during numerical parameter modifications).
[

] Authorizes the selected parameter modification.
[ ] Validates the selected value for the parameter whose modification is in progress.
[>>] Displays the next page. When there are several parameters, moves to the next parameter.
3.2.1.3 Locking the keyboard
The keyboard can be locked from any screen by pressing down, at the same time, the [F5] and [F6]
keys. When the keyboard is locked, the key functions are disabled. However, pressing down any key
always enables the user to exit the screen from the standby mode.
To unlock the keyboard, just press down the keys successively according to the sequence [F2], [F2],
[F3], [F3], [F6]. In case of error, pressing down the [F1] key enables to reset the sequence.
3.2.2 USE OF KEYS
3.2.2.1 Programming digital parameters
Select the parameter with the [  ] or [  ] key in the appropriate menu and press the [

] key to modify
the parameter. The first digit will blink. Select the digit to be modified with the [  ] or [  ] key and then
either increase [  ] or decrease [  ] the value. The [ ] key validates the modifications of the selected
field, and the [  ] key cancels the modifications of the selected field.
3.2.2.2 Programming configurable parameters with toggle list
Select the parameter with the [  ] or [  ] key in the appropriate menu, press the [

] key to modify the
parameter. The field will blink. Select the desired value with the [  ] or [  ] key in the toggle list. The
[ ] key validates the modifications of the selected field, and the [  ] key cancels the modifications of
the selected field.