Environnement AS32M, Technical Manual, Page: 55 / 186

Duplication prohibited
AS32M
Environnement
S.A
DECEMBER 2013
3–17

Auto-calibration cycle screen
Definition of keys specific to this screen:
[Escape] Allows canceling of the cycle in progress without storing the new calibration coefficient.
[End]
Forces the end of the cycle
and stores
the new calibration coefficient.
CAUTIONS:
The calibration coefficient is calculated even if the measured values and the target values are
not the same. This could result in an incorrect calibration coefficient.
This function triggers the auto-calibration cycle
on the current gas inlet
. It is thus necessary to
select the desired gas inlet before carrying out an Auto-calibration cycle.
To return to measurement mode after a manual auto-calibration, press the [Sample] key to select the
sample inlet.