Emerson Rosemount CT5800, Manual

Page: 28 / 192

1.9 Detailed system specifications
Table 1-2 gives the physical characteristics of the analyzer. Figure 1-3 shows schematic
diagrams of the sensor and mounting points. Table 1-3 gives the general characteristics of
the analyzer.
Table 1-2: Physical Characteristics
Rosemount CT5800 Value Comment
External dimensions (closed) 694.5 x 292 x 515 mm
27.34 x 11.5 x 20.28 in. Length x Width x Height
Nominal dimensions
External dimensions (open) 27.34 x 11.5 x 41.24 in.
694.5 x 292 x 1047.5
mm Nominal dimensions, front panel at lowest point
To open the enclosure, the minimum height required is
1030 mm (40.55 in.)
Front panel swept radius 21.46 in.
545 mm Allow sufficient space for the front panel to swing through
an arc of 180 ° (see
Figure 1-5 ).
Weight 80 kg
176.37 lb. Approximate weight
The analyzer must be wall mounted. Do not mount it on
stud or partitioned walls.
Table 1-3: General Characteristics
Rosemount CT5800 Value Units Comment
Voltage 220/240 ± 10%
110/120 ± 10% Vac 50 Hz ± 5% (factory set)
60 Hz ± 5% (factory set)
Peak power consumption 1100 W Max consumption per gas analyzer
Continuous steady-state
power consumption 800 W
Electrical compartment
enclosure
- -
Aluminum
Optical compartment
enclosure - - Aluminum
Measurement technique - - Mid IR absorption spectroscopy
Mid IR source N/A N/A Quantum Cascade Laser
Near IR source N/A N/A Interband Cascade Laser Tunable diode laser
Laser classification Class 1 BS EN 60825-1: 2007 safety of laser products.
Equipment classification and requirements
(identical to IEC 60825-1 2007)
Inlet gas port connector ¼
6
in.
mm Swagelok
®
type, factory-configured, specify on
order
Outlet (exhaust) gas port
connector ¼
6
in.
mm Swagelok type, factory-configured, specify on order
Measurement result signals 4 to 20
or Modbus over TCP /
IP mA 4 or 8 channel outputs, specify on order
Plan Reference Manual
September 2019 00809-0100-5800
28 Emerson.com/Rosemount