Emerson ROC364 Instruction Manual Download | Manualshive

Page: 111 / 146

background image

ROC364 Instruction Manual

B-6

Local Display Panel

Rev Jun/05

To return to the previous menu, press MENU. To return to the Main Menu, press MENU until the Main
Menu displays.

B.3.3 Main Menu Display

The Main Menu provides eight menu selections. Table B-2 describes the menu items. The subsequent
subsections provide detail for the various Main Menu selections.

Table B-2. Main Menu Items of the Local Display Panel

Menu Description

I/O

Provides a menu from which you can select monitored values from the five Input/Output (I/O)
groups: Discrete Inputs, Discrete Outputs, Analog Inputs, Analog Outputs, and Pulse Inputs.

SYS

Provides four displays of system parameters and related information.

DB

Provides a menu for viewing points in the history database.

AGA

Provides a point display for each configured AGA point.

PID

Provides a point display for each configured PID point.

FST

Provides a point display for each configured FST point.

MSG

Provides a point display for each configured FST message point.

LCD

Provides eight displays that you define using ROCLINK configuration software. Provides a menu
to view or edit of parameters.

B.3.4 I/O Menu Display

The Local Display Panel returns the I/O menu display after it is selected from the Main Menu. Refer to
Figure B-7. The I/O menu allows you to select point displays from the various I/O groups configured in
the ROC. Move the cursor with the UP or DOWN keys and press ENTER to select the desired I/O group.
If the selected I/O group does not have any points configured in the ROC, the I/O menu remains
displayed and the cursor moves to the beginning of the list. To return to the Main Menu, press MENU.

>DI’s

AO’s

DO’s

PI’s

AI’s

UP

DOWN

ENTER

MENU

Figure B-7. I/O Menu Display

The point displays provide current information specific to a point selected from the I/O group list. For
example, the point display for an Analog Input shows the associated Tag, Units, Point Number, Active
Alarms state, and the process variable Value expressed in engineering units.

Table B-3 identifies the I/O types available from the I/O menu. For further information about the point
parameters, see the applicable ROCLINK configuration software user manual.

«
...
109
110
111
112
113
...
»

Summary of Contents for ROC364



















































































































































Reviews:

No comments

Related manuals for ROC364

Brand: ABB Pages: 2

Brand: Rayrun Pages: 2

Brand: IDenticard Pages: 2

Brand: 3Ware Pages: 2

Brand: Nelsen Corporation Pages: 16

Brand: National Instruments Pages: 34

Brand: Samson Pages: 2

Brand: Parker Pages: 32

Brand: Rayrun Pages: 4

AeGIS 7000 Series

Brand: PACH & COMPANY Pages: 2

Brand: Parker Pages: 12

ZITON RADIO LOOP MODULE

Brand: EMS Pages: 26

Brand: Fortin Pages: 8

Brand: Danfoss Pages: 30

Brand: Hattersley Pages: 2

Brand: National Instruments Pages: 6

Brand: Acumen Pages: 6

Brand: PCB Piezotronics Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands