January 2016, Rev. 1
CAM216/16 IOM
Doc. Number: ECM-402-0116
52
Section 9: Device Descriptor (DD)
Device Descriptor (DD)
8.
Here, the Device will detect under HART Modem Tab as shown in below image:
Figure 50
AMS Device Manager Detection
Troubleshooting AMS:
1.
If AMS Device Manager does not show the live device on Device Connection View,
Under the HART Modem Tab, then do the following:
—
Use the AMS Device Manager Configuration program to ensure that the
modem has been assigned to a COM port.
—
Check that the modem is connected to the serial port corresponding to the
COM port.
2.
If AMS Device Manager gives error messages when it tries to populate the database
with the new device, do the following: Run the AMS Device Manager Database
Verify/ Repair (Start-All Programs- AMS Device Manager- Database Utilities-Database
Verify Repair).
3.
If New DD is added in AMS and it shows the old DD. First remove old DD available
in database i.e. from C:\AMS\Devices\HART\06060, and then add new DD to AMS
through add Device Type.
Adding a DD to the 375/475 (HandHeld)
1.
Prerequisites:
—
375/475
—
DD Files
—
SD Card Reader
—
Field Communicator Easy Upgrade Utility
2.
DD will be added using the Easy Upgrade Programming Utility (in Start Menu)
3.
Open Easy Upgrade Utility
4.
375/475 can be connected to PC via IrDA, Bluetooth and Card Reader
