January 2016, Rev. 1
CAM216/16 IOM
Doc. Number: ECM-402-0116
12
Section 2: Installation of CAM16
Installation of CAM16
3.
Connect CAM16 J3 into MPA CPU connector P2 and tighten the 3 plastic holders.
Figure 11
CAM16 J3 Connection
4.
Follow step 5 or 6 depending on your HART Network type:
Table 12.
HART Control Types (7)
Control Type
Step to Follow
HART – Analog Control (Point-to-Point)
Not Available
HART – Digital Control (Multi-Drop)
Step 5
HART – Digital Control (Wireless THUM)
Step 6
5.
HART Digital Control (Multi-Drop):
a.
Locate the networking port wires (in the back of the MPA CPU) and connect
the appropriate wires to the CAM16 I+ and I- for the network port to be used
for communications. Once selected, open the front cover of the MPA and
connect your HART input to the desired networking port.
Table 13.
HART Control Types (8)
CAM16 J4
MPA TBM
O-
20
O+
21
I-
22
I+
23
