manualshive.com logo in svg

EMC Connectrix EC-1100 System, User Manual

Share
Download
EMC Connectrix EC-1100 System User Manual Download Page 3

Connectrix EC-1100 System User Guide

iii

This equipment generates, uses, and may emit radio frequency energy. The equipment has been type tested 
and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules, which are 
designed to provide reasonable protection against such radio frequency interference.

Operation of this equipment in a residential area may cause interference in which case the user at his own 
expense will be required to take whatever measures may be required to correct the interference.

Any modifications to this device - unless expressly approved by the manufacturer - can void the user’s 
authority to operate this equipment under part 15 of the FCC rules.

Trademark Information

EMC

2

, EMC, and Symmetrix are registered trademarks and Connectrix, Connectrix Manager, and PowerPath are trademarks of EMC Corporation.

HP and HP-UX are registered trademarks of Hewlett-Packard Company.
Zip is a registered trademark of Iomega Corporation.
Microsoft, Windows, Windows 95, Windows 98, Windows NT, Windows 2000, and Internet Explorer are registered trademarks of Microsoft 
Corporation.
Pentium is a registered trademark of Intel Corporation.
IBM and AIX are registered trademarks of International Business Machines, Inc.
QuikSync is a trademark of Iomega Corporation.
Netscape Navigator is a registered trademark of Netscape Communications Corporation.
Sun, Solaris, and Java are trademarks of Sun Microsystems, Inc.
UNIX is a registered trademark in the United States and other countries and is licensed exclusively through X/Open Company Ltd.

All other trademarks used herein are the property of their respective owners.

Summary of Contents for Connectrix EC-1100 System

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands