EMC Connectrix EC-1100 System, User Manual

Page: 112 / 216

4
4-20
Connectrix EC-1100 System User Guide
Fabric Zoning
6. Continue adding or clearing members from the zone by repeating
previous steps.
7. When the zone is complete, click Save Zone at the bottom of the
Modify Zone dialog box.
The new zone is added to the Zone Library.
Changing the configuration for an active zone set does not
dynamically apply changes. For any change to an active zone set,
even modifying members in a zone that belongs to a zone set, activate
the zone set using steps in Task 3: Activate the Zone Set on page 4-15.
You do not need to deactivate the active zone set before activating a new zone
set.
Copy, Delete, and
Modify Zone Sets
Copy, delete, and modify zone sets through the Copy, Delete, and
Modify
options on the Actions pop-up menu in the Zone Sets dialog
box.
To display the Zone Sets dialog box, in either the Zoning View or the
Topology View
move your cursor over the Configure icon and click
Zone Sets
on the pop-up menu.
Copy Zone Sets
1. Select a zone set from the Zone Library section of the Modify
Zone Set dialog box.
2. Move your cursor over the Actions icon and click Copy on the
pop-up menu.
3. When the Copy Zone Set dialog box appears, enter a zone set
name in the Copy to: field and click OK. The new zone set
appears in the Zone Set Library.
Delete Zone Sets
1. Select a zone set in the Zone Set Library section of the Zone Sets
dialog box.
2. Move your cursor over the Actions icon, then click Delete on the
pop-up menu.
3. When the dialog box appears asking you to confirm the deletion,
click Yes.
The zone set is deleted from the Zone Set Library in the Zone
Sets
dialog box.