EMC Connectrix EC-1100 System, User Manual

Page: 150 / 216

A
A-10
Connectrix EC-1100 System User Guide
Connectrix Manager Software Messages
R
S
Message:
Remote sessions are not allowed from this address.
Description: Only network addresses specified in the Session Options dialog box are
allowed to connect to the Connectrix service processor.
Action: See your system administrator if you want this address to be configured
for remote sessions.
Message:
Remote session support has been disabled.
Description: The ability for remote users to connect to the Connectrix service processor
has been disallowed.
Action: See your system administrator, or modify the entries in the Session
Options
dialog box.
Message:
Resource is unavailable.
Description: Could not perform the last operation.
Action: Verify that the link to the product is up. If the link is up, then the
Connectrix service processor may be busy. Try again later.
Message:
Service processor shutting down.
Description: The Connectrix service processor has shut down for reasons unknown.
Action: Exit the Connectrix Manager and reboot the computer.
Message:
SNMP trap address not defined.
Description: If a community name is defined, a corresponding trap address must also
be defend.
Action: Enter the corresponding trap address.