EMC Connectrix EC-1100 System, User Manual

Page: 107 / 216

4
Configuring and Managing Zoning
4-15
Fabric Zoning
Task 3: Activate the
Zone Set
To enable a zone set to control access between devices in a fabric, you
must activate the zone set. Changing the configuration for an active
zone set does not dynamically apply changes. For any change to a
zone set, even modifying members in a zone that belongs to a zone
set, activate the zone set using the following steps.
You do not have to deactivate the active zone set before activating a new zone
set.
1. From either the Zoning View or Topology View, move your
cursor over the Configure icon and click Zone Sets on the pop-up
menu.
This displays the Zone Sets dialog box (shown in Figure 4-7 on
page 4-13).
1. Select a zone set on the Zone Set Library.
2. Move the cursor over the Actions icon and click Activate on the
pop-up menu. This displays the following dialog box.
Figure 4-9 Activate Zone Set Dialog Box
3. Click Start at the bottom of the dialog box.
Messages appear in the Status area indicating the progress of the
command. Buttons on the dialog box are disabled until the
process completes.
When the process is complete, the Start button changes to a Close
button.
4. Click Close to close the dialog box.