EMC Connectrix EC-1100 System, User Manual

Page: 103 / 216

4
Configuring and Managing Zoning
4-11
Fabric Zoning
The magnifying glass icon may not appear by a domain if the Add by
World Wide Name
radio button is selected and there are no nodes
attached to ports on a director. If the Add by port number radio button is
selected, the Show unused ports check box is deselected, and there are
no nodes attached to director ports.
9. Add members to the zone using one of the following procedures:
• Select and drag members (ports and/or node WWNs) from
the Attached ports/nodes section to the Members in Zone
section of the dialog box.
Figure 4-5 illustrates how node WWNs are placed in the
Members in zone
section. Dragging ports with device WWNs
from the Attached ports/nodes section to the Members in
zone
section places the domain ID/port number and the
device WWN into the Members in zone section.
Figure 4-5
Ports and WWNs Added to Members in Zone Section
• Add detached node. Move your cursor over the Actions icon
and select Add Detached Node from the pop-up menu. When
the Add Detached Node dialog box appears, type in the
WWN of the node that you want to add as a zone member and
click OK. This adds the WWN to the Members in Zone
section.