EMBRON Hatteland X Series, User Manual

Page: 31 / 134

31
Installation Procedures
Installation
IND100078-38
Wall Mounting (Display Model)
The Wall Mount Display model comes with a complete mounting bracket system constructed into the frame of the unit. Screws
and Nuts have to be provided by customer, depending on type of wall material/structure. Note: All procedures should be
performed by a skilled technician that can interpret the physical parts and correctly identify them on the illustrations below for
correct installation). At least 2 persons are recommended during mounting due to the display’s weight and size.
▼1: Drill 2mm holes x 10 pcs into wall as indicated. ▼2: Mount 10 x threaded M8mm screws, review details below.
▼3: Place Display on wall, remove possible plug covers to get access to threaded M8 screws. Mount Previling torque nuts 10 x M8mm
(provided by customer) to secure and fasten the Display unit to wall. Please note the available Lifting eye nuts on top of frame that
could ease the mounting during lifting and placing the display unit onto the wall bracket.
▼4: Leave 1 or 2 Plug Covers to allow Power Cable and Remote Control Cable to go through the Plug Cover holes in the outer frame.
Plug all other empty holes with the Plug Covers to avoid dust to enter inside frame.