EMBRON Hatteland X Series, User Manual

Page: 13 / 134

13
Product Labeling
IND100077-158
Label Locations
Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below are seen
from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation
vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to fit
properly. The arrangement of labels may be shifted/stacked differently as it is based on factory options, such as; Touch
Screen, but they will be grouped together where possible.
Label Positions Notes Applies for Product
Labels placed near User Controls
- Serial Number Label
- Touch Screen Label (if applicable)
- QC Label
HD 55T22 MVD-AAx-TOGx
Chart & Planning Table
Models
Labels placed near User Controls
- Serial Number Label
- Touch Screen Label (if applicable)
- QC Label
HD 55T22 MVD-AAx-LOGx
Floor Tilt Models
Labels placed on side.
- Serial Number Label
- Operating System (OS) label.
- QC Label
HT C02Hx STC-xxx-xxxx
Compact Computer
Note: Applies only for Chart
& Pl Floor Tilt
models that comes with
factory mounted HT C02
placed inside foot/base.