75
User Controls
OSD Menu Functions
IND100064-48
|---2---
Miscellaneous
> Touch Power
This setting will allow you to filter the signal processing from touch screen to reach the computer.
For instance, if user only want touch screen to be active when DisplayPort signal is defined as Main
Input, but disallows touch screen processing on other signal inputs, the non-touch screen enabled
signal inputs would require the user to operate elements on screen either with keyboard, mouse or
just for information purposes only with no user interaction possible via touch screen.
Settings as follows (applies to defined Main Source Input):
Note:
Touch is enabled only when choice is Main Input:
For current models: “DisplayPort”, “HDMI1”, “HDMI2” or “HDMI3”
For HW00 models: “DisplayPort”, “HDMI”, “DVI” or “VGA”. Touch is enabled when choice is Main Input.
+
Additional
settings:
“Signal”
= Touch is enabled when any input is active as Main Input.
“Active”
= Touch is always enabled, even if there are no image on screen.
Display unit may be powered off, but require power cable connected
as well as a powered on computer. Signals from touch screen will
still reach the computer.
|---2---
Miscellaneous
> External Power Button
This setting will allow you to manually enable the use of an external power button to turn off the
Display unit. Please review the Pinout Assignments (Potentiometer Control 9-pin DSUB MALE
Connector) for connectivity.
Settings as follows:
“Enable”
= Key press from External power button detection enabled.
“Disable”
= Key press from External power button detection disabled.
|---2---
Miscellaneous
> DDC/CI
This setting will allow user to enable and set which signal input where DDC/CI display control
communication will occur. For more information about DDC/CI, please review the “Operation
Advanced (DDC/CI) Control Overview” chapter in this manual.
The possible choices are listed below* (enabled on any input source that appear as Main Input)
* For current models: “DisplayPort”, “HDMI1”, “HDMI2” or “HDMI3”.
* For HW00 models: “DisplayPort”, “HDMI”, “DVI” or “VGA”.
Summary of Contents for Hatteland X Series
