EMBRON Hatteland X Series, User Manual

Page: 118 / 134

118
IND100665-2
Introduction
Hardware Code (HW00, HW01 etc.) are a series of technical and mechanical improvements engineered for
our Maritime Multi Vision (MVD) display range and are valid for all 32 and 55 inch units. In this document
we shall explain the differences between pre-HW01 (HW00) and HW01.
The process of implementing HW01 for the units was initiated from Q3 2019.
Reference Engineering Change Notification:
https://www.hattelandtechnology.com/product-notifications/hardware-change-/-upgrade-for-32inch-and-55inch-products
The user manual will still keep specifications and technical drawings etc. available for pre-HW01 (marked
with HW00) units to support those who do not have the HW01 products installed. The HW01 code is
basically a enhancement of our current product range, but the type numbers stays the same and the
pre-HW01 (HW00) units are not officially obsoleted and are still supported by Hatteland Technology.
All current type approvals, testing and certificates are valid. Additionally the HW01 solution is tested
according to IEC60945 and IACS E10.
----------------------------------------------FROM THE OFFICIAL ECN-------------------------------------------------
Hardware change / upgrade for 32 and 55 inch units:
We will upgrade all our 32 and 55 inch units with digital inputs only, having the same input specifications as
our 43 inch display.
Change(s) applies for the following Hatteland Technology Product(s):
- HD 32T22 MVD-xxx-xxxx
- HD 55T22 MVD-xxx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.
Effective from:
1 July 2019
Change(s):
- Modification made to the internal scaler board, removing RGB and DVI-D inputs.
- Modification made to the internal scaler board, adding 2x HDMI 1.4.
- New inputs will be 2x HDMI 1.4, 1x HDMI 2.0 and 1x DP 1.2.
- Modification made to video scaler firmware to reflect the hardware changes described above.
--------------------------------------------------------------------------------------------------------------------------------
How to identify pre-HW01 (HW00) and HW01 differences?
The newer HW01 units are at first glance 90% physically the same as the pre-HW01 units. To quickly find
out if your unit is pre-HW01 (HW00) based, the unit has 1 x DVI + VGA connnectors, while for the HW01
unit, there is no DVI/VGA connectors available, but 3 x HDMI and 1 x DisplayPort (DP) instead. If you
download or have electronic versions of the user manuals, datasheets or technical drawings “HW00” will be
present as written text on either the document itself or as part of the filename. “HW01” is not written on any
document or filenames (except for this document).
Filename examples: (note that “HW00” or “hw00” is always present)
“ds_hd32t22mvd-max-axgx _hw00 .pdf” (PDF datasheet pre-HW01 (HW00))
“a009487_hd32t22mvd-ma1-axgx _hw00 .pdf” (PDF technical pre-HW01 (HW00))
“32.0 inch Multi Vision Display (MVD) (HW00) ” (Typical written title name/indentification in data sheet/user manual)
Hardware Code (HWxx) Overview
Appendix