EMBRON Hatteland X Series, User Manual

Page: 119 / 134

119
Hardware Code (HWxx) Overview
Appendix
IND100665-2
Mechanical and Technical differences
Listed here are the differences between pre-HW01 and HW01 products. The area of noticable differences
is cleary marked with red circles.
pre-HW01 (HW00) HW01
Signal Inputs area
CHANGES FOR SIGNAL INPUT CONNECTORS (32 inch used as example, same for 55 inch)
DVI-D HDMI DP VGA
Signal Inputs area
HDMI HDMI HDMI DP
AVAILABLE SIGNAL PARAMETERS REVISED IN OSD MENU (32/55 INCH UNITS)
pre-HW01 (HW00) HW01
DisplayPort Resolution: 3840x2160@60Hz
Image Settings Select source to Adjust Main Input
Color Mode Settings Brightness 128
PIP Menu Contrast 128
OSD Menu Saturation 128
Miscellaneous Hue 128
Input Source Settings Sharpness 128
Communication Analog VGA Adjustment
Service Settings Auto Adjustment On
Presets Exit
Fault Status
Exit
Main Input:
Third Input:
Second Input:
Fourth Input:
DisplayPort Resolution: 3840x2160@60Hz
Image Settings Select source to Adjust Main Input
Color Mode Settings Brightness 128
PIP Menu Contrast 128
OSD Menu Saturation 128
Miscellaneous Hue 128
Input Source Settings Sharpness 128
Communication Exit
Service Settings
Presets
Fault Status
Exit
Main Input:
Third Input:
Second Input:
Fourth Input:
Image Settings menu shows “Analog VGA Adjustments”
and “Auto Adjustment”. Additionally within other menus; “DVI”,
and “VGA” function is mentioned/active.
Image Settings menu with removed “Analog VGA Adjustments”
and “Auto Adjustment”. These only apply for Analog Signals.
Additionally within other menus; “DVI”, “VGA” is removed, and
replaced with “HDMI1”, “HDMI2” and “HDMI3”.
Example from OSD
Example from OSD