EMBRON Hatteland X Series, User Manual

Page: 65 / 134

65 User Controls
IND100064-48
OSD Menu Functions
Color Mode Settings
Lets you adjust the color temperature (Kelvin degrees) of the image. This applies to the Main Source signal.
Window overlays (PIP/PBP) and OSD Menu overlay will be unaffected. Lower values make the image
appear warmer, while higher values will make it appear cooler. The contents of this submenu and choices
are listed below.
Illustration (does not appear in menu): The Kelvin color temperature scale (approximate and symbolic):
1800K 4000K 5500K 8000K 12000K 16000K
|---2---
Color Mode Settings > Color Temperature
Set to either “9300K” (Cool, a blueish white), “8000K” (Neutral, a white close to natural light),
“6500K” (Warn, a reddish white) or “User”, (only available when Advanced Menu Mode is active).
|--------3--------
Color Mode Settings > Color Temperature > User
Allows individual adjustment of Red, Green and Blue color gains. The selected setting will
be saved for each signal input.
● Note: Value adjustable from 0 to 255. 128 is factory default.
|---2---
Color Mode Settings > Gamma
This will activate the stored gamma curve color compensation as well as the LED indicators or
backlight brilliance used with ECDIS. Set to either as listed below* where these represents the two
storage locations for compensation data. When either of them are active, they will override the color
temperature setting for the signal channel. Different signal channels can be set to different settings
that will be saved.
This function is suitable for use with external equipment. Color temperature will be disabled.
● Note: Default is No Calibration with Gamma 2.2 and 140nits.
* For current models: “No Calibration”, “Calibration DisplayPort” or “Calibration HDMI”.
* For HW00 models: “No Calibration”, “Calibration DVI”, “Calibration RGB”, “Calibration DisplayPort” or “Calibration HDMI”
|---2---
Color Mode Settings > Red Gain
Increase or Decrease the overall gain for the displayed image on screen affecting values RGB,
where R=RED intensity in specific is adjusted (GB values are not affected).
● Note: Value adjustable from 0 to 255. 128 is factory default.