EMBRON Hatteland X Series, User Manual

Page: 24 / 134

24 Installation
IND100078-37
General Installation Recommendations
Configuring DC power input housing connector
Note: Only applicable for DC models!
For installations that require DC power input, use the provided
2-pin DC Power Input housing with internal cable screw terminal.
It is recommended that thickness of cables are
Minimum 20 AWG and Maximum 18 AWG. Length should be
determined by qualified personnel.
1: Open the housing
2: Unmount the fasteners. (FIG 1)
3: Mount power cables to screw terminal (FIG 2). Note polarity!
4: Secure the cable tightly with fasteners (FIG 3, FIG 1)
5: Close the housing
DC shall be grounded to protective Earth / Safety Ground!
Review “General Mounting Instructions” in the “Installation” chapter earlier in this manual.
FCE17-E2W2SS-2N0
1 x 2-pin DSUB Female DC Power Input internal cable screw terminal
L17DPPK09JSU
1 x DSUB Cover for FCE17-E2W2SS-2N0
Screw terminal
FIG 1
FIG 2
FIG 3
+ -
+ -
+
-