Electro Industries Shark 200 Installation & Operation Manual Download Page 113

Page: 113 / 352

Doc

E149701

6-5

6: Using the Shark® 200 Meter

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

2. Press the

Enter

button from the Main Menu to view the Parameters screen for the

mode that is currently active.

6.2.3: Using Reset Mode

Reset Mode has two options:

• Reset: Demand (rStd): resets the Max and Min values

• Reset: Energy (rStE): resets the energy accumulator fields

1. Press the Enter button while

either rStd or rStE is in the A win-
dow. The Reset Demand No or
Reset Energy No screen appears.

• If you press the

Enter

button

again, the Main Menu appears,
with the next mode in the A
window. (The

Down

button

does not affect this screen.)

• If you press the

Right

button,

the Reset Demand YES or
Reset Energy YES screen
appears. Press

Enter

to per-

form a reset.

NOTE:

If Password protection is enabled for reset, you must enter the four digit

password before you can reset the meter. (See Chapter 5: Communication Installation
on page 5-1, for information on Password protection.) To enter a password, follow the
instructions in 6.2.4: Entering a Password on page 6-6.

CAUTION!

Reset Demand YES resets

all

Max and Min values.

2. Once you have performed a reset, the screen displays either “rSt dMd donE” or

“rSt EnEr donE”and then resumes auto-scrolling parameters.

MENU

ENTER

MENU

ENTER

MENU

ENTER

MENU

ENTER

Summary of Contents for Shark 200

































































































































































































































































































































































Search results

Summary of Contents for Shark 200

Reviews:

Related manuals for Shark 200

Brands by name

Popular brands

Electro Industries Shark 200, Installation & Operation Manual

Search results

Summary of Contents for Shark 200

Reviews:

Related manuals for Shark 200

Brands by name

Popular brands