Electro Industries Shark 200 Installation & Operation Manual Download Page 103

Page: 103 / 352

Doc

E149701

5-23

5: Communication Installation

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

• Enabling Password protection prevents unauthorized tampering with devices.

When a user attempts to make a change that is under Password protection,

Communicator EXT

software opens a screen asking for the password. If the

correct password is not entered, the change does not take place.

IMPORTANT!

You must set up a password before enabling Password protection.

Click the

Change

button next to Change Password if you have not already set up a

password.

• Change the Password: click the

Change

button. You will see the Enter the New

Password screen, shown below.

1. Type in the new password (0 - 9999).

2. Retype the password.

3. Click

Change

. The new password is saved and the meter restarts.

NOTE:

If Password protection has already been enabled for configuration and

you attempt to change the password, you will see the Enter Password screen
after you click

Change

. Enter the old password and click

to proceed with

the password change.

• Change the Meter Identification: input a new meter label into the Meter Designation

field.

Summary of Contents for Shark 200

































































































































































































































































































































































Search results

Summary of Contents for Shark 200

Reviews:

Related manuals for Shark 200

Brands by name

Popular brands

Electro Industries Shark 200, Installation & Operation Manual

Search results

Summary of Contents for Shark 200

Reviews:

Related manuals for Shark 200

Brands by name

Popular brands