ELABO G1-1, Operating Instructions Manual

Page: 72 / 135

72
10. MENU SYSTEM
(PARAM)
10.5 Test plan Management and Automatic testing
After opening „Test plan management“, the operator must enter the pass-
word for level 2 (PARAM).
Fig. 10:20: Main menu - Test plans
manual test
set of parameters
testplans
device settings
setup
plan
param
test
Main menu
remote
Fig. 10.21: Test plan management - test plan selection
test plan
test plan
test plan
test plan
delete
create
edit
load
Test plan
plan
Full-electronic G1-1 HV DC-Tester
The menu is used for adding test plans. Test plans contain one or more
test steps and so form a defined test sequence. The sequence is displayed
in the form of a list; the device runs through the list from top to bottom.
Depending on the options fitted to the device, e.g. HV, ISO. steps that are
used to provide information to/prompt the operator, to poll buttons or to
poll/set a digital input/output (option).
To be able to assemble test plans, test steps must be defined for the indi -
vidual test types (HV, ISO). This action is carry out on the main menu with
"set of parameters", on this topic see chapter 10.4. „set of parameters“.