ELABO G1-1, Operating Instructions Manual

Page: 65 / 135

65
10. MENU SYSTEM
The test parameters for the test types are described in chapter 11.
„Test“ - starts the manual test with the actual parameter values - see
also chapter 10.3.
„Save“ - saves the changes made. You can assign a new name to
the modified set or use the old name (overwrite the parameters) .
„Selection“ - of a special parameter set. The parameter set selection is shown.
„Menu“ - closes the parameter screen and returns to the menu before
test
Fig. 10.12: Load parameter - parameter screen
Full-electronic G1-1 HV DC-Tester
test mode .................
test voltage .........[kV]
run-up ...............[kV/s]
run-back ...............[kV/s]
off
0.10
1.00
HV
test


HV_1000 DC
back to menu before
parameter values
further parameter
function buttons