103
12. INPUT/OUTPUT TEST STEPS
12.1.2
Analog Outputs/Inputs
The expanded digital/analog interface
Option G1-1 E07 (chapter 12.3)
provides 16 digital / 2 analog outputs and 8 digital / 3 analog inputs.
The analog outputs/inputs are working with DC-voltage of 0.0 ... 10.00 V.
Example: The analog output is used for generating of the nominal value
of an AC supply of 0 - 230 V. In this case, the si-unit (V) and the final
value of the AC-voltage (230) must be predefined
for the analog output.
Chose Analog OUT.. "change" (see Fig. 12.1).
The display will show all analog outputs.
Chose the analog output for definit
ion "change".
For analog in-/outputs, the definition of
self-explanatory names is possible.
In the menu parameter-block definition, the tester is showing this self-
explanatory name for the out-/input. See also chapter 12.1.1.
Abb. 12.6: Einstellungen Analog Ausgang 1
Fig. 12.5: Settings analog outputs
Full-electronic G1-1 HV DC-Tester
Summary of Contents for G1-1
Page 38: ...38 4 OPERATING MODES 4 2 2 Normal mode input step Full electronic G1 1 HV DC Tester...
Page 39: ...39 4 OPERATING MODES 4 2 3 Normal mode output step Full electronic G1 1 HV DC Tester...
Page 40: ...40 4 OPERATING MODES 4 2 4 Normal mode time step Full electronic G1 1 HV DC Tester...
Page 133: ...Expires 04 19 2016...
