ELABO G1-1, Operating Instructions Manual

Page: 15 / 135

15
2. SAFETY REGULATIONS
DIN EN 50191
These operating instructions must always be available in the place the
device is installed. Incomplete or illegible operating instructions are to be
replaced without delay. In this situation we would of course be pleased to
be of assistance.
In addition to the operating instructions, statutory, generally applicable
and other binding regulations for the prevention of accidents and for the
protection of the environment are to be followed.
Note:
DIN EN 50191 (VDE 0104) regulates the operation of test systems.
Follow the stipulations in the DIN standard.
2.5 Protective facilities / Emergency Off
- All the system‘s safety features are to be checked for correct function
prior to putting into operation each day.
- Prior to placing the system in operation, all safety features must be cor-
rectly fitted and functional.
- Safety features are only ever allowed to be removed for repair.
- Safety limit switches are not allowed to be bypassed.
2.6 Operator qualifications
- The operators must hold an appropriate qualification to operate the sys -
tem. The operators must be informed and instructed about the function
and especially the risks and hazards related to the system.
- Anybody who works on the system must have read the operating instruc-
tions, be familiar with the content and follow it.
- The responsible superior has the obligation to instruct the personnel
based on the operating instructions.
- Temporary employees and trainees are only allowed to work on the sys-
tem under the supervision of appropriately qualified personnel.
- The responsibilities of the personnel are to be clearly defined.
2.7 Working clothes (personal protection equipment) and
protection at work
- Wear the necessary working clothing for your activity, e.g. ESD footwear,
safety shoes, flame-retardant clothing, etc. Obtain information on this
issue from your supervisor or the safety officer.
- If necessary, wear hearing protection.
Full-electronic G1-1 HV DC-Tester