ELABO G1-1, Operating Instructions Manual

Page: 23 / 135

23
3. MAKEREADY
caps lock

enter numerical value
15
1
q
a
y
2
w
s
x
3
e
d
c
4
r
f
v
5
t
g
b
6
z
h
n 7
u
j
m
8
i
k
,
9
o
l
.
0
p
+
-

back to the mask be-
fore
number fields
capital- or small let-
ters
display
deletes the character on
the left of the cursor
accepts the entry as the
actual value
"Enter"-field
decimal point
3.8. Operating touchscreen display
Touchscreen displays are touch-sensitive monitors. Areas are defined on
them that represent, e. g. buttons (touch buttons), fields and message
windows. There is in principle no difference between the operation of
„touch buttons“ and pressing normal buttons. You operate touch buttons
by touching them with a special „blunt“ stylus or your fingertip.
Errors due to triggering actions unintentionally!
Always only ever touch one point on the screen.
Damage to the surface of the touchscreen display!
Do not use any pointed, sharp or hot objects to operate the touch-
screen display
3.8.1 Entering arbitrary numerical values
- Touch the field where the entry is to be made (e.g. test time, actual value
for the voltage, etc).
The system opens a numerical keypad.
The top line indicates the value currently entered (e.g. 15).
- Change the actual value by touching the number fields.
- Accept the value entered by touching the „Enter“ field. The new value is
accepted as the actual value.
Fig. 3.6: Numeric keypad
Full-electronic G1-1 HV DC-Tester