ELABO G1-1, Operating Instructions Manual

Page: 34 / 135

34
4.
OPERATING MODES
Full-electronic G1-1 HV DC-Tester
4 OPERATING MODES
The device permits basic operating modes: high voltage test or insulation
resistance test without ramp and with ramp. The operating modes must be
pre-selected in the parameter settings, in the test plan or via the interface.
The illustration below gives an overview of the operating modes, voltages
and currents.
During the usage of the device, a differentiation is to be made between
the two operating modes HV / IS.
For more detailed information see chapter 4.1ff.
G1-1
DC-devices
HV
DC
bis 6000 V
IS (Option)
DC
bis 6000 V
type of test
modes
ramp
voltage
Measurement
range
Test
Test "Fast-Start-Mode"
test without ramp
test with ramp
test without ramp
test with ramp
Test
Test "Fast-Start-Mode"
G1-1A/M G1-1B/N G1-1C/P
0,50 mA 0,02 mA 0,1 mA
0,5 mA 0,2 mA 1 mA
5 mA 2 mA 10 mA
G1-1A/M G1-1B/N G1-1C/P
2,5 GOhm 5 GOhm 1 GOhm
Fig. 4.1: Voltages and currents (special devices are different)