ELABO G1-1 Operating Instructions Manual Download Page 27

Page: 27 / 135

3. MAKEREADY

Fig. 3.10: ELABO Startup-screen

Fig. 3.11: ELABO Startup-screen

Fig. 3.12: Main menu

3.10

Switching on

Prerequisite:
- The device is installed in accordance with chapter 3.1 to 3.3.
- The device is connected in accordance with chapter 3.4 to 3.7.
- Chapters 3.8 and 3.9 are familiar.

• Switch the mains switch S1 to

the „I“ position.
The mains indicator H1 in the

switch illuminates.
The system is booting up and

the display indicates the startup

screen for approx. 5 s.
Now a the display is dark for ap-

prox. 5 s.

The display reports now

Type

serial no.

software version

After the boot process, the device

indicates the "main menu".

Note:

As delivered all passwords are activated. If a menu command is

selected, the password prompt appears, see chapter 3.9 further forward

in this document.

Full-electronic G1-1 HV DC-Tester

Summary of Contents for G1-1








































































































































Search results

Summary of Contents for G1-1

Reviews:

Related manuals for G1-1

Brands by name

Popular brands

ELABO G1-1, Operating Instructions Manual

Search results

Summary of Contents for G1-1

Reviews:

Related manuals for G1-1

Brands by name

Popular brands