ELABO G1-1, Operating Instructions Manual

Page: 14 / 135

14
2. SAFETY REGULATIONS
2.3 USE AS PER SPECIFICATIONS AND EXCLUSION OF
LIABILITY
The tester is only allowed to be used for the intended tests. Any other usage
is considered incorrect. ELABO is not liable for any resulting damage, the
risk is borne solely by the user. Correct usage also includes compliance
with the information in these operating instructions.
The tester and its components have been developed and built for usage
in an industrial environment. In accordance with DIN EN 55022 ITE, this
system is a class A appliance. Neither the tester as a complete unit nor its
individual components are allowed to be used in a different environment.
If this information is not followed, ELABO accepts no liability whatsoever
for any interference produced and the resulting damage.
Prior to working with the tester, these operating instructions and all ap-
pendices must be carefully read and understood by all personnel operating
the tester. The tester is only allowed to be operated by trained personnel.
The safety features and design of the tester are not allowed to be modi-
fied. Any change requires the express agreement of ELABO.
Unauthorised changes to the tester, as well as the usage of spare parts,
accessories and additional equipment that has not been tested and ap-
proved by ELABO may degrade the function and properties of the tester.
ELABO is not liable for resulting damage.
ELABO does not accept any liability for damage resulting from the failure
to follow the operating instructions or due to failure to take due care dur-
ing transport, installation, handling, operation, care and maintenance or
repair of the device, even if specific mention of this duty to take care is
not specifically highlighted in these operating instructions.
2.4 GENERAL RULES OF CONDUCT AND SAFETY
INSTRUCTIONS
The tester is built to the state-of-the-art and recognised safety rules. Nev-
ertheless, during operation there may be a risk of serious injury to the user
or other personnel, or damage to the device or other property.
The tester is only allowed to be used in correct working order and cor-
rectly taking into account the operating instructions. Malfunctions that may
degrade safety are to be rectified without delay.
Managerial staff must ensure personnel tasked with working on the tester
have read and understood the operating instructions prior to starting work.
The managerial staff have the obligation to only ever operate the device in
correct working order and to ensure the operators use the tester correctly.
Full-electronic G1-1 HV DC-Tester